Price: $399.99
(as of 2026-10-24 05:56 GMT+0000 – Details)
Ultra‑Slim Profile and Universal Fit
The mount’s ultra‑slim profile places the television only 1.77 inches (4.5 cm) from the wall, a dimension that helps large screens appear almost flush with the surface. It is rated for displays from 55 inches up to 100 inches and supports a maximum weight of 165 lb (75 kg). The mounting interface follows the VESA standard with a maximum pattern of 600 × 400 mm, making it compatible with a broad range of LED, OLED, HDTV, 4K, LCD and Smart TV models from manufacturers such as Samsung, LG, Panasonic, Sony, TCL, Philips and Hisense. This universal fit means the same bracket can be used across multiple product lines without requiring additional adapters. The fixed depth also simplifies room planning because the TV’s distance from the wall does not change with swivel motion.
Load Capacity, Safety Certification and Warranty
Safety is addressed through a TÜV certification that confirms the bracket meets stringent European safety standards. The manufacturer states that the unit has been tested at three times its rated maximum load, providing a margin intended to reduce the risk of failure under normal use. A 15‑year guarantee backs the product, indicating the company’s confidence in long‑term durability; the warranty typically requires product registration and proof of proper installation. These credentials are relevant for installers who must demonstrate compliance with building codes or insurance requirements, though the certification does not replace the need for proper wall anchoring.
Swivel Range, Motion Mechanism and Tilt Omission
Motion is delivered by a four‑arm mechanism that enables a total swivel of 120°, split evenly as 60° to the left and 60° to the right. The movement is marketed as One‑Finger™ technology, implying that the force required to rotate the screen is minimal, thanks to low‑friction bearings integrated into the arms. Notably, the design omits a tilt function; the manufacturer explains that large, fragile panels are better served without vertical angle adjustments, which could introduce stress on the display. Consequently, users who need upward or downward tilt must consider alternative mounts or accept a fixed vertical orientation. The swivel range may also be limited in practice by the TV’s width and nearby furniture.
2D Leveling for Post‑Installation Alignment
Alignment after installation is handled by a 2D Leveling™ system that permits independent horizontal and vertical correction. The adjustment screws are captive and accessible once the TV is hung, allowing the installer to fine‑tune the picture without removing the display; a standard hex key is sufficient for the adjustments. This feature is useful when the wall surface is not perfectly flat or when the mounting holes are slightly off‑center. However, the leveling range is limited to the mechanical travel of the screws, so extreme misalignment may still require re‑drilling.
Integrated Cable Inlay System and Holders
Cable routing is integrated through a Cable Inlay System (CIS®) that runs the wires inside the support arms. Dedicated cable holders at the rear of the bracket keep power, HDMI and network cords organized and hidden from view; the holders are adjustable to accommodate typical cable diameters. This approach reduces visual clutter and protects cables from accidental pulling, which is especially valuable for heavy installations where cable weight can add strain. The system does not provide a separate conduit for in‑wall runs, so any wiring that must pass through the wall still needs a conventional pass‑through.
Installation Kit, Drilling Template and AR Assistance
The package includes a spirit level, a drilling template, an extra‑wide wall plate, mounting screws and Fischer® DuoPower plugs, all intended to simplify the mounting process. A free DrillRight™ AR application for Android and iOS assists the installer by projecting the first drill hole onto the wall through the phone camera and by overlaying a virtual level, reducing measurement errors. The extra‑wide plate distributes load across a larger area, which can be advantageous on hollow‑core or plasterboard walls, though the installer must still verify that the substrate can bear the combined weight of the bracket and television. The drilling template matches the plate’s hole pattern, ensuring accurate placement of all anchors.
Warranty Scope, Practical Limits and Wall‑Type Considerations
A 15‑year guarantee covers the structural integrity of the mount under normal residential use, reflecting the manufacturer’s confidence in the materials and the three‑times load test; warranty claims generally require proof of purchase and evidence that the mount was installed according to the supplied instructions. Practical considerations include the absence of tilt, the reliance on a solid wall for the supplied anchors, and the maximum VESA pattern of 600 × 400 mm, which may exclude some ultra‑large commercial displays that use larger hole spacings. Installers should also confirm that the wall type (concrete, brick, stud) matches the provided hardware, as the included plugs are optimized for masonry and may require different anchors for wood studs. The mount is not rated for outdoor or high‑humidity environments.